© 1996 to 2010 The Mining Equipment Prospector

NEW Arrivals

Equipment For Sale

refresh this page for a more current list

ref # 616

date posted: April 9, 2010

NEW PRICE $22,000 each

Plymouth MMD 25 Ton Locomotives


Rebuilt In 2003-2004 by Mining Equipment Co, Deutz Diesel F6L413FW Engines, hours range from approx. 3,500 - 5,000. Location: Atlanta, Georgia   Price: $29,000 each 

(8) Units Available!

contact us

SURPLUS MINING EQUIPMENT LIQUIDATION
FOR IMMEDIATE SALE:

ref # 417

date posted: April 9, 2010

NEW Price $50,000

Vertical Conveyor Belt System

2005 FKC Lake Shore, Location: Atlanta, Georgia,

Price: $395,000

contact us

SURPLUS MINING EQUIPMENT LIQUIDATION
FOR IMMEDIATE SALE:

ref # call

date posted: 17 Feb., 2010

Elphinstone CAT R1700G

SOLD SOLD

R1700G i have coming up for sale it currently has 11500 hrs on it the transmission has been replaced but the engine, convertor diffs and wheelends need their midlife rebuild all still in good condition.
attached is some pictures of the loader as it stands now but on a reasonable offer i will get the machine professionally pressure cleaned and painted.

contact us

ref # 1814

date posted: 29 Sept., 2009

En-Creter, Ready to Spray

• Engine is a 4 cylinder water cooled diesel 40 HP, with a mine approved catalytic exhaust system

• Main Carrier is a four wheel hydrostatic drive rough terrain buggy

• Brakes are mine approved triple redundant fail safe braking system

• Length is 174” or 14.5’, width is 56” or 4.7’, height is 72” or 6’, and weight is 4100 kg or 9039 lbs.



• The spray arm has 360 degree rotation with a normal operating range of 120 degrees, with a maximum forward reach of 23’, and a maximum vertical reach of 23’9”

• Unit has a flashing white light and an audible back up alarm

• Unit is equipped with boom lights and stabilizer jack lights

• Unit is equipped with a new on board 4000 watt generator for extra lighting or power tools


The unit was rebuilt in 2008 and has not been used since. The hour meter reading is 5 hrs.

R1700G i have coming up for sale it currently has 11500 hrs on it the transmission has been replaced but the engine, convertor diffs and wheelends need their midlife rebuild all still in good condition.
attached is some pictures of the loader as it stands now but on a reasonable offer i will get the machine professionally pressure cleaned and painted.

contact us

ref # 419

date posted: 22 June, 2009

B&D-900

NEW Hydraulic Breaker
Technical Specifications
Model B&D-900
Impact energy class (ft.lbs/blow) 2000
Blow Speed (bpm) 400-900
Oil Pressure Required (gpm) 15.9-33.9
Operating Pressure (psi) 1,850-2,130
Working Weight (lbs) 1,389
Overall Length (inch) 78.9
Tool Diameter (inch) 3.5
Recommended Carrier Weight (ton) 7--12

contact us

ref # 2103s

date posted: 27 May, 2009

Elphinstone R1700

more details

contact us

ref # 2103s

date posted: 27 May, 2009

Toro 007

4 available

contact us

ref # 2101

date posted: 27 May, 2009

Toro 60

3 x Toro 60, 2006 dump trucks

contact us

ref # 292

date posted: 28 October, 2008

MT-444 Mine Trucks 2 available

Year:  1997

Total Hours:11,000.each frame.hours.total.,
Detroit.Series.60.engines

Clark.driveline,(wet.disc.SAHR.brakes)

Air cond.cabin------------
Good. frontline. machines

low.comp.hours.
New.tyres.alround.aircond.cabin.

contact us

ref # 3116

date posted: 17 September, 2008

updated price November 25

“ Jumbo Drill ” SOLD

Terex/Reedrill MK65-HE


The MK65HE is an Electric Drill, Diesel Tram, rubber tired, two Boom Jumbo designed to drill Drifting Holes, Crosscut Holes, Bench Holes and Rockbolt Holes. Location: Atlanta, Georgia
Hours: 1350 Price: $195,000 NEW PRICE $130,000

FACTORY REFURBISHED by TEREX in 2004

contact us

SURPLUS MINING EQUIPMENT LIQUIDATION
FOR IMMEDIATE SALE: