WANTED:

Date: Sun, 25 Dec 2011 20:57:59 -0500

Happy Hollidays, I'm looking for Scooptram of 1.5 y3 and 2.4 y3 to send to Peru, used or re-powered, It must be in very good conditions and ready for to work. Thanks.

contact us

ref # f 11-24

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Wed, 21 Dec 2011 09:53:17 +0400
Subject: Re: EQUIPMENT WANTED Network Search



I find for my client truck toro 50+ or toro 50D.

Do you have any???

contact us

ref # f 11-23

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Tue, 20 Dec 2011 18:23:33 -0500
Subject: Elphinstone

Hi
We are looking for later model or new Elphinstone equipment, LHDs or Haul trucks.
Send me the year, hours and photos. As much info as possible on all machines for sale Elphinstone make only.

Machines located anywhere in the world, North America preferred.

Thank you very much

contact us

ref # f 11-22

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Mon, 12 Dec 2011 16:44:56 +0100
Subject: Conveyor belt


Please email me your full requirement regarding conveyor belts. Thank you.


morning Sir,

We are a trading and recycling company in Qingdao,China. We are looking for various used conveyor beltings---steel & non-steel? We can take used conveyor beltings rejected by coal mine, power or cement plants, steel mills, etc.

Do you have used conveyor belts available? If so, could you email me your offer---available quantity, target price, payment term,etc? We can buy large quantity on a regular basis. Thanks

contact us

ref # f 11-21

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Thu, 8 Dec 2011 15:26:28 -0700

I need  core for JCI250M and JCI300M ,MTI LT350 AND MTI LT410 two of each one

contact us

ref # f 11-20

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Wed, 7 Dec 2011 07:43:55 +0800
Subject: RE: EQUIPMENT WANTED


Hello


I work for a shaft sinking company in Australia


We are tendering some work in Hong Kong

And we will be need a low profile 25t dump truck

Front End Loader with side tipping bucket

Telehandler with 10m reach

Electric compressor Atlas GA160



I require rental prices and outright purchase price

contact us

ref # f 11-19

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Tue, 6 Dec 2011 08:19:48 -0800


Hi Denis, I emailed you yesterday about the 5 Eimco 3 yard scooptrams .

We would also be interest in hearing about any used 2 to 3 yard scooptrams you have info . on        

contact us

ref # f 11-18

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Mon, 5 Dec 2011 15:04:40 -0500

Hi Denis

I looking for  scooptram

1 -1.5 Yard
1 - 2.4 Yard

In good running conditions
thanks

contact us

ref # f 11-17

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Fri, 2 Dec 2011 08:52:57 -0500
Subject: 24-inch gauge


Looking for battery locomotive, man-trip, rail, and accessories for 24-inch gauge.

contact us

ref # f 11-16

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Wed, 30 Nov 2011 17:35:13 +0200
Subject: REQUEST FOR DRILLING RIG & ROOF BOLTER: MAIL1/2

Dear Sir/ Madam
I am urgently looking for 9 of Drilling rigs and 9 of Roof bolters New or Refurbished for use in HARD ROCK - Manganese.

contact us

ref # f 11-15

Subscribe and receive the Buyer's contact information.

WANTED:


Date: Wed, 30 Nov 2011 17:39:33 +0200
Subject: REQUEST FOR LHDs

Dear Sir/ Madam
I am urgently looking for 9 of LHDs New or Refurbished for use in HARD ROCK - Manganese. See attached for specs..
The mine (Kalagadi Manganese) is currently under construction in Northern Cape, South Africa

contact us

ref # f 11-14

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Wed, 30 Nov 2011 09:22:34 -0500

Denis, As per our telephone conversation, we are in search of the following equipment . Refurbished, or in good operating condition .

1 - Scoop  two to three and half yard unit for narrow vain mining application
2- 42 inch air operated slushers with good scrapers .
1- Quick attach push blade to mount on Sandvik 410 six yard scoop for pushing muck back tight
In the stoppes.

contact us

ref # f 11-13

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Thu, 17 Nov 2011 12:27:25 -0600

Allis Chalmers Gyratory Crushers
Gyratory 42X65 MKII
Gyratory 54X74 MKII

Nico Apron Feeder:
84" X 16 FT+
72" X 16 FT+

Bucyrus Erie Rotary Parts:
Mod. 45-R, 47-R and 49-R

Magnetic Separators:
With or without Tubs
Size: 36" Dia. X 96 FACE
Size: 48" Dia. X 96 FACE

contact us

ref # f 11-12

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Tue, 15 Nov 2011 14:44:04 -0700

We need to buy a core JCI250M or JCI300M scoop tram

contact us

ref # f 11-11

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Thu, 3 Nov 2011 14:08:32 +0800

Good morning Sir,

We are a trading and recycling company in Qingdao,China. We are looking for various used conveyor beltings---steel & non-steel? We can take used conveyor beltings rejected by coal mine, power or cement plants, steel mills, etc.

Do you have used conveyor belts available? If so, could you email me your offer---available quantity, target price, payment term,etc? We can buy large quantity on a regular basis. Thanks.

contact us

ref # f 11-10

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Thu, 27 Oct 2011 23:23:23 -0700

I require 1-2 Small Explosion Proof (Coal Spec) Roadheaders
Such as Mitsui S200M or similar size.

contact us

ref # f 11-09

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Thu, 27 Oct 2011 14:23:01 -0700

Looking for the following equipment for rentals.
Required Dec/Jan 2012

A) A two boom jumbo; that will work in both headings, & drill a 12' round.

B) A automatic bolter; set up for 1-1/4" resin bolts, able to install 5' to 10' long bolts.

C) 2 ea 6 Cy scoops.

D) Possibly a 3 Cy scoop.

E) A dry shotcrete pot and predampener.

contact us

ref # f 11-08

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Mon, 24 Oct 2011 10:38:48 -0400

Looking for a small rod mill, rubber lined or ni-hard liners (prefer ni-hard), on a stand. 24" D x 2', 3' or 4' L.

contact us

ref # f 11-07

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Sat, 22 Oct 2011 00:30:17 +0500

Dear Sir,
We are looking for a large variety of mining equipment for the customers. We are currently in demand for:

Cat 777D's, 777F's, 785C's, and 789C's

Any large shovels and excavators larger than Hitachi EX1800 or equivalent

Cat 992G's or newer

Cat D10R or T and Cat D11R or T models

contact us

ref # f 11-06

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Fri, 21 Oct 2011 09:24:00 -0400

Denis, I need for a mine in South America these super trucks Cat 777

contact us

ref # f 11-05

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Wed, 19 Oct 2011 10:34:06 -0500

WE ARE LOOKING FOR A REBUILD GEARBOX  L700BP  JOY PART# 762-6746-Z4

contact us

ref # f 11-04

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Tue, 11 Oct 2011 16:32:28 -0400


Anything to offer?

I am searching for 2 units of electrically powered mining blasthole drill rigs capable for drilling 9 7/8 rotary, P&H or Ingersoll Rand / Atlac Copco does not matter.

contact us

ref # f 11-03

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Fri, 07 Oct 2011 12:05:21 -0700

Dear Sir,

We are looking for an scooptram Caterpillar R1300.

contact us

ref # f 11-02

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Fri, 7 Oct 2011 10:56:44 -0400

I am looking for 2 Traction motors for our CAVO 310,

or a complete 310 good running or as is and or any spare parts.

contact us

ref # f 11-01

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Thu, 22 Sep 2011 13:39:45 +0200
Subject: Want to buy

We are looking for several units of Liebherr R984C from 2005 or younger.

contact us

ref # S 11-43

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Fri, 16 Sep 2011 21:17:28 +0000

Denis,
"Wanted"
5-6 Cat 773D Haul trucks
Engine hours not a concern, we intend to replace them upon taking possession

contact us

ref # S 11-42

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Tue, 13 Sep 2011 16:08:02 -0700

We are a mining company located in the Tucson Arizona area and are looking at purchasing underground mining equipment for our underground mine. We are currently looking at purchasing  3.5ST scooptram and would appreciate if you could provide us with a contact so we can further discuss our needs going forward.


scooptrams (LHD)
Atlas Copco
ST3.5

contact us

ref # S 11-41

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Wed, 7 Sep 2011 10:07:47 -0400

Denis,

We are looking the following equipment in any condition
· 2 -scissor lifts
· 1 -boom truck
· 1 -Normet shotcrete sprayer 1050 or 6050
· 2 -1 yard LHD
· 1 -2 yard preferably ST2D or G
· 1 -3 to 4 yard LHD preferably ST 3.5
· 2 -6 yard LHD preferably ST6C
· 1 -Maclean 928 bolter
· 3 -30 ton rock trucks
· 1 -Anfo loader
· 2 - 282 Copco Jumbos
· 1 -scaler
· 1 - fuel lube truck
All equipment needs to have a power shift Transmission .

contact us

ref # S 11-40

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Tue, 06 Sep 2011 08:27:28 -0700
Subject: 2 x Large Shovels
Denis,

I am looking for 2 x Large Front Shovels for a new project just starting up.
Komatsu, Hitachi, O & K, Liebherr.

Late model, low hours, but immediate delivery essential.

contact us

ref # S 11-39

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Fri, 2 Sep 2011 12:08:37 +0300


Dear Sirs ,

we are looking for used Getman scaler model S324 or S330 , 4WD .

contact us

ref # S 11-38

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Thu, 01 Sep 2011 12:48:03 -0700
Subject: RFQ - Shotcrete


Denis,

Urgently require the following Shotcrete equipment:

2 x Spraymec 7110WPC

2 x Normet Himec 9905BT

contact us

ref # S 11-37

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Mon, 29 Aug 2011 00:48:14 -0400
Thread-index:

We are looking to purchase following items urgently .
Please send us your best quotation with competitive prices
Pictures and complete detail as soon as possible

1) Used air Compressor in Running Condition ( 92 to 98)
· Air compressor Ingersoll Rand VHP750 with Cat Engine 3306
· Air compressor Ingersoll Rand XP825 with Cummins Engine
· Air compressor Ingersoll Rand XP900 with Cat Engine
· Air compressor Ingersoll Rand XP750 with Cat Engine 3306
· Air compressor Atlas Cop co  XATS with Cat engine 3306
· Air compressor Atlas Cop co  XA760 with Cat 3306 engine
     
2) Used drill wagon in good running condition
*  Pneumatic Ingersoll Rand Drill 350
* Pneumatic Ingersoll Rand Drill 351
*  Tam Rock Drill ( 600 . 800 , 1000 )
· Furukawa Drill PC 200


3) Used Hammer for pneumatic Drill
* Hammer / Drifter 120 for Ingersoll Rand  
* Hammer / Drifter 140 for Ingersoll Rand
· Hammer / Drifter 123 for Garden Denver
· Drill bits 102 mm ( 4 lnches)

contact us

ref # S 11-36

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Thu, 25 Aug 2011 09:34:53 -0400
Subject: O&K RH200


We are in the search for a RH200 in excavator configuration.

contact us

ref # S 11-35

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Thu, 25 Aug 2011 21:49:31 -0400

Denis, I need an aggregate mill preferably mobile one.
Here are more requirements The equipment is jaw and impact crushers and 2-deck screening plant. They need to process between 40 and 60 m3 per hour.  They could be either stationary or mobile units.

contact us

ref # S 11-34

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Sun, 21 Aug 2011 18:30:20 -0400

Hi, we are presently searching for the used equipment below:


Komatsu PC5500 Excavator or Hitachi EX5500 Excavator. Prefer a low hour machine

Liebherr front shovel MODEL: R995

O&K RH200 Front shovel
Demag MODEL H485S Front shovel


Swing motor K-558A for a P&H 2800

2 Komatsu dozers model D155 A1 or A2 from year 1974 to 1991, with 4 barrel ripper located in north America only.

contact us

ref # S 11-33

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Thu, 18 Aug 2011 17:17:16 -0700

Looking for
1.- DEUTZ F10L413FW Engine.

contact us

ref # S 11-32

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Mon, 15 Aug 2011 16:24:17 -0700
Subject: Mine Hoists


Hello,

My company is working on a project for a wave generating device requiring equipment capable of delivering around 15000-20000 lbs of line pull at about 1500 fpm. I have looked around it appears mine hoists may be the best "off the shelf" solution. We would be looking for two such devices, and would be willing to consider higher specifications as well.

contact us

ref # S 11-31

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Tue, 16 Aug 2011 12:52:35 -0700 (PDT)

Dear Sirs,

I searched your listings and was not able to find a Used Scooptram Atlas Copco ST710, Detroit engine, Series 50. Would you be able to refer me to a individual or company who may have this item for sale.

contact us

ref # S 11-30

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Tue, 16 Aug 2011 11:13:04 -0500

urgently need quotes on the following:

1 x Used Atlas Copco L1C or equivalent Drill (Single Boom Drill)

1 x Used Atlas Copco X3C Jumbo or equivalent Drill (Triple Boom Surface Jumbo)

Client wants late model low hours and is in a hurry.

Also looking for a late model Toro 151 Loader and several Cat 789C's

contact us

ref # S 11-30

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Mon, 15 Aug 2011 11:32:16 -0700 (PDT)

Dear Denis,
We have a customer overseas that is looking for TAMROCK equipments.
Please offer us your best prices and detail information.
Tamrock
Ranger
CHA 550/560/660/800 with Tiger
CHA 550/560/660/800 without Tiger
Pantera

contact us

ref # S 11-29

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Mon, 9 Aug 2011 10:25:41 -0500

We are looking to buy ventilation fans, surplus inventories any make or size.

contact us

ref # S 11-28

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Mon, 8 Aug 2011 14:25:41 -0500

1
scooptrams (LHD)
CAT Elphinstone R1300G, 4 yards, low hours

contact us

ref # S 11-27

Subscribe and receive the Buyer's contact information.

WANTED:


Equipment needed for Mineral concentration plant of 500 tnpd.

Apron type plate feeder, 24"x 10' from center of header axels. Hydrostatic transmission; 7.5 HP electric motor, 6 poles, 440 V 60 cycles.

Grizzly vibrator, 3' wide x 6' long., boxed with reinforced thick steel, hexcentric axel armed with roller bearings. Grid with 1 central stair, formed by longitudinal rods of manganese steel. Transmission with V-belts with electric motor 12.5HP, effective altitude of operation of power, 4-pole.

Tilted conveyor # 1 24 "wide by 21 m. long, between center and tackle head, complete with geared motor of 15 HP. effective altitude of operation, 4 poles, 60 cycles. Including runway inspection. (Transport of minerals vibrating grizzly).

Jaw crusher 16 "x 24" 1016 model, the type of forced feeding, complete with electric motor of 50 HP effective altitude of operation, 440 V, 4 poles, 60 cycles, with integral metal base for crusher and motor.

2 story shaking screens, each of 5'x 10 'with steel mesh with openings of 1 ?"x1 ?" and 3/8"x3/8" steel frame, heat treating stress relieved, floating eccentric mechanism mounted on rollers shoots, with electric motor power of 12.5 HP effective altitude of operation, 4 pole, 440v, 60 cycles.

Tilted conveyor belt # 2, 24 "wide by 17 m. in length, between centers of pulleys head, complete with geared motor horsepower of 12.5 HP effective altitude of operation. 4 poles, 60 cycles, including gateway inspection. (Transport of the jaw crusher to strip # 5.)

Electromagnet.

2 conical crushers, 3' diameter each, Symons model of short head (S.H.) heavy-duty, full lubrication system, powered by a 100 HP engine. Effective power at the altitude of operation, 6 poles, includes metal support to be installed bolted to a horizontal concrete slab rigid and well-grounded.

Tilted conveyor belt No. 3, 24 "wide x 11.5m. long, between centers of pulleys head, complete with geared motor of 10 horsepower effective in altitude of operation, 4 poles, 60 cycles, including runway inspection (transport ore from the shale shaker to the conical crusher).


Metal hopper, capacity of 250 m3 of fine ore storage, with a cylindrical shape with vertical bottom section and prismatic damper.

Tilted conveyor No. 4, 24 "wide x 10m. long, between centers of pulleys head, complete with geared motor of 7.5 HP to the effective altitude of operation, 4 poles, 60 cycles, including inspection gateway, (transport ore from the conical crusher shale shaker to 5'x10 'n º 1).

Tilted conveyor belt No. 5, 24 "wide x 6m. long, between centers of pulleys head, complete with geared motor of 7.5 HP to the effective altitude of operation, 4 poles, 60 cycles, including inspection gateway, (transport ore from the conical crusher shale shaker to 5'x10 'n º 2).

Ball mill of 9 1/2' diameter by 12' long. type of overflow discharge, helmet made of steel plates ASTM A283 grade C, stump tops with integral head, robust bearings with bronze bushings self align special lubrication system for circulating oil. sprocket and pinion with helical teeth cut with precision by generation with a system of automatic spraying lubricating grease in the cover properly installed metal. carbon steel countershaft mounted two bearings specially designed to form a single unit with self-aligning roller shooting; chute feed system, cylinder liner and caps mill chrome molybdenum alloy steel, trommel discharge. Transmission between the electric motor and countershaft gear reducer for oil bath parallel shaft, coupling Falk. integral metal base for the engine and gearbox lining of the cylinder and caps with rubber anti abrasive 5.mm. thick with a hardness of 50 to 60 Shore "A" set of sensors for monitoring oil temperature in the stumps of main bearings. De thermocouples includes installation, wiring and sensor settings alarm and stop the mill to pre-established temperature, besides the visual temperature control powered by a 700 HP engine. Effective power at the altitude of operation, 6 poles with their respective starter.

Horizontal centrifugal pump, model SRL "C" (closed impeller) 5 "suction and 4" output. Sliding base 25hp electric motor. Effective power at the altitude of operation, 4 poles, 60 cycles.

Shaker super conditioner 7'x 7 'tall, made of sheet metal tank of 3/16" thick, with bridge support and agitation mechanism for normal operation with V-belts transmission, with motor 12.5hp electric power for delivery to the altitude of operation, 4 poles, 60 cycles.

A unit cell of the type ws-240-m vertical turbulence 8'diametro tank of 2.7m high, built in welded steel plate 3/16" wall thickness. aeration and agitation mechanism with drive shaft in a metro rubber inferior wall in a rolling aeration tube of 3/16" thick supported on a vertical bearing housing integrally machined with ball bearings and driven by a 30hp electric motor three-phase power delivery to the altitude of operation, 4-pole, 6 cycles, lead-copper circuit.

4 flotation cells bank, each 56 "x56" 100 'cubic type DR (equivalent to cells Denver Nº 30), with an engine of 30hp effective power to the altitude of operation for every 2 cells, 440v, 60 cycles, including gutters foaming. - Lead-copper circuit.
4 flotation cells bank, each 56 "x56" 100' cubic type DR (equivalent to the cells, Denver Nº30), with an engine of 30HP effective power to the altitude of operation for every 2 cells, 440v, 60 cycles, including gutters foaming. - scavengher lead-copper circuit.

8 flotation cells bank, each 38 "x38" of 40 cubic feet of capacity, type sub "a", 10hp engine with power delivery to the altitude of operation for every 2 cells, 440 V, 60 cycles . Foam includes gutters. lead cleaning circuit copper.

Horizontal centrifugal pump slurry of ore or tailings, SRL model 3 "diameter suction and 3" output, powered by a 7.5hp engine power delivery to the altitude of operation, 4 poles, 60 cycles. includes base and vase sliding motor mount, pulleys, belts and guard protection for the transmission.

A super conditioner shaker # 2, 7 'diameter by 7' tall tank made of sheet metal of 3/16" thickness, with bridge support and agitation mechanism for normal service with transmission by V-belts with electric motor power 12.5hp pa effective altitude of operation, 4 poles, 60 cycles. zinc circuit.

Conditioner # 3 super shaker 7 'diameter by 7' tall tank made of sheet metal of 3/16"thick, with bridge support and agitation mechanism for normal transmission by belts with v, 12.5hp with electric motor power of effective altitude of operation, 4 poles, 60 cycles. Zinc circuit.

6 flotation cells bank, each 56 "x56" of 100 cubic feet rate DR (equivalent to cells Denver No. 30) with an engine of 30 horsepower effective altitude of operation for every 2 cells, 440 v, 60 cycles. Foam includes gutters. Zinc rougher circuit.

4 flotation cells bank, each of 56 "x56" of 100 cubic feet rate DR (equivalent to cells Denver No. 30) with an engine of 30 horsepower effective altitude of operation for every 2 cells, 440 v, 60 cycles. Foam includes gutters. zinc scavenger circuit.

8 flotation cells bank, each 38 "x38" of 40 cubic feet of sub type "a" with a motor of 10 horsepower effective operating altitude for every 2 cells, 440 V, 60 cycles . Foam includes gutters. Zinc cleaner circuit.

Horizontal centrifugal pump type SRL model, 2 ?" "diam. suction and 2 ?" outlet. powered by a 7.5 HP engine power delivery to the altitude of operation, 4 poles, 60 cycles.

Horizontal centrifugal pump slurry of ore or tailings SRL model, 3 "diam. suction and 3" exit. Powered by a 7.5 HP engine power delivery to the altitude of operation, 4 poles, 60 cycles. Includes base and base sliding motor mount, pulleys and guard protection for the transmission.

A super conditioner shaker # 3, 7 'diameter by 7' tall tank made of sheet metal of 3/16" thickness, with bridge support and agitation mechanism for normal service with transmission by V-belts with electric motor power 12.5HP pa effective altitude of operation, 4 poles, 60 cycles. Cooper circuit.

4 flotation cells bank, each 56 "x56" of 100 cubic feet rate DR (equivalent to cells Denver No. 30) with an engine of 30 horsepower effective altitude of operation for every 2 cells, 440 v, 60 cycles. Foam includes gutters. Zinc rougher circuit.

4 flotation cells bank, each 56 "x56" of 100 cubic feet rate DR (equivalent to cells Denver No. 30) with an engine of 30 horsepower effective altitude of operation for every 2 cells, 440 v, 60 cycles. Foam includes gutters. Zinc scavengher circuit.

8 flotation cells bank, each 38 "x38" of 40 cubic feet of capacity, type Sub "A", 10HP engine with power delivery to the altitude of operation for every 2 cells, 440 V, 60 cycles . Foam includes gutters. Copper cleaning circuit.

Horizontal centrifugal pump type SRL model, 2 ?" "diam. suction and 2 ?" outlet. Powered by a 7.5 HP engine power delivery to the altitude of operation, 4 poles, 60 cycles. Cooper foam circuit.

Horizontal centrifugal pump slurry of ore or tailings, SRL model 3 "diameter suction and 3" output, powered by a 7.5hp engine power delivery to the altitude of operation, 4 poles, 60 cycles. includes base and vase sliding motor mount, pulleys, belts and guard protection for the transmission. Cooper circuit.

3000cuft. Blower Not bided.

One module with 8 feeders full duplex liquid reagents, each tub with cast iron discs, 12 "diam. with 10 cups. Regulatory mechanisms, capacity of 1000 cc. and drive with gearbox and electric motor 5 HP, 4 poles and 60 cycles.

Thickener rakes 18 'diam. by 10 'high, complete with tank made of structural steel plate ?" thick, rolled and welded into template provided to work. Complete rakes system, bridge support mechanism and central mechanism driving 4HP electric motor with power delivery to the altitude of operation, 6 pole, 440v, 60 cycles. Zinc circuit.

Horizontal centrifugal pump type SRL model, 2 ?" "diam. suction and 2 ?" outlet. Powered by a 7.5 HP engine power delivery to the altitude of operation, 4 poles, 60 cycles. Lead foam circuit.

A continuous filter 6''diam. for 6 discs, with tank and valves for connection filtering at one end, to try a product. tank integrally welded steel plates and reinforced properly with connections feeding, drainage and overflow. babbit metal bearings, shaft of high strength steel manifold. six discs, each formed by 10 sectors of wood. TRANSMISSION complete with speed reducer directly coupled to the main gear and motor three-phase electric power 4hp effective operating altitude. Paddle agitator in the bottom, to prevent sedimentation of the mineral. Including addition, the drive system of 4hp r gear motor receiver filter and tank. Lead circuit.

Vacuum pump, size 6804 model 1003, liquid ring type with a capacity of up to 950 ft3 of air against a vacuum of 24: HG. at sea level, with housing, rotor, cones and cast iron covers alloy high corrosion resistance, abrasion; own connections to the water pipe, muffler and base metal motor and pump. Driven by a 60-h effective power to the altitude of operation, 4 poles, 60 cycles.

Thickener rakes 18 'diam. by 10 'high, complete with tank made of structural steel plate ?" thick, rolled and welded into template provided to work. Complete rakes system, bridge support mechanism and central mechanism driving 4HP electric motor with power delivery to the altitude of operation, 6 pole, 440v, 60 cycles. Zinc circuit.

Horizontal centrifugal pump type SRL model, 2 ?" "diam. suction and 2" outlet. Powered by a 7.5 HP engine power delivery to the altitude of operation, 4 poles, and 60 cycles. Lead foam circuit.

A continuous filter 4 'diam. for 6 discs, with tank and filter valve connection at one end to try the product. Tank integrally welded steel plates and reinforced properly with power connections, drainage and overflow, babbit metal bearings. Axis of high strength steel manifold. Six discs, each one formed by 10 sectors of wood. TRANSMISSION complete with speed reducer directly coupled to the main three-phase electric motor power 3hp effective altitude of operation, 6 pole, 440v, 60 cycles. Paddle agitator at the bottom to prevent sedimentation of the mineral. Further includes the drive system with geared motor 3hp receiver filter and tank. Zinc circuit.

vacuum pump, size 6804 model 1003, liquid ring type with a capacity of up to 950 ft3 of air against a vacuum of 24Hg. at sea level, with housing, rotor, cones and cast iron covers alloy high corrosion resistance, abrasion; own connections to the water pipe, muffler and base metal motor and pump. Driven by a 60-h effective power to the altitude of operation, 4 poles, and 60 cycles.

Thickener rake 10 'diam. by 10 'high, complete with tank made of 3/16" thick structural steel plate, rolled and welded into template provided to work. Complete rakes system, bridge support mechanism and central mechanism driving 4HP electric motor with power delivery to the altitude of operation, 6 pole, 440v, 60 cycles. Cooper circuit.

Horizontal centrifugal pump type SRL model, 2 ?" "diam. suction and 2" outlet, powered by a 7.5 HP engine power delivery to the altitude of operation, 4 poles, 60 cycles. Lead foam circuit.

A continuous filter 4 'diam. for 6 discs, with tank and filter valve connection at one end to try the product. tank integrally welded steel plates and reinforced properly with power connections, drainage and overflow, Babbit metal bearings. Axis of high strength steel manifold. six discs, each one formed by 10 sectors of wood. TRANSMISSION complete with speed reducer directly coupled to the main three-phase electric motor power 3hp effective altitude of operation, 6 pole, 440v, 60 cycles. paddle agitator at the bottom to prevent sedimentation of the mineral. Further includes the drive system with geared motor 3hpand a receiver filter tank. Cooper circuit.

Vacuum pump, size 6804 model 1003, liquid ring type with a capacity of up to 950 ft3 of air against a vacuum of 24Hg. at sea level, with housing, rotor, cones and cast iron covers alloy high corrosion resistance, abrasion; own connections to the water pipe, muffler and base metal motor and pump. driven by an 60HP effective power to the altitude of operation, 4 poles, 60 cycles.

contact us

ref # S 11-26

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Wed, 3 Aug 2011 11:48:50 -0400

I am looking for a spare tire and rim for our CAVO 510, please call me as soon as possible..

contact us

ref # S 11-25

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Mon, 01 Aug 2011 09:48:01 -0700
Subject: RFQ - Cat Trucks


Denis,

Looking for the following Trucks:

1995 & NEWER CAT 796, 773 & 775

contact us

ref # S 11-24

Subscribe and receive the Buyer's contact information.

WANTED:

Date: 1 Aug 2011 11:00:59 -0400
Subject: Want-to-buy: CAT D10R Crawler Tractor

Want-to-buy:

Caterpillar D10R Crawler Tractor with S/U Blade,
Ripper not a requirement - USA/Canada only - Prefer East of Mississippi River.

contact us

ref # S 11-23

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Sat, 30 Jul 2011 08:21:24 -0700
Subject: Large Mining Excavators RFQ


Denis,

I am searching for some used / new excavators for a copper mine. I need the following:

2 x excavators - hydraulic electric or cable electric
1 x excavator - hydraulic diesel


Possibly could take 2 of each.

Important thing is that bucket size is min 16m3 (prefer 18m3) and would consider any of the following models (listed in order of preference):

Liebherr 9350 or 994
P&H 1900 or 2100 or 2300
Komatsu PC3000 or PC3200 or PC5000
Terex (any model of similar size as Liebherr)


Our preference is to get new but would consider machines with low hours and good maintenance history.

contact us

ref # S 11-22

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Wed, 20 Jul 2011 06:50:13 -0700


Denis, could you find a second hand single boom jumbo that could work on 3.0x3.0M section minimum up to 5mx5m section. We have a customer looking for a small jumbo.

contact us

ref # S 11-21

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Mon, 18 Jul 2011 13:37:50 -0700
Subject: UG Loaders RFQ

Denis,

I need the following Underground Loaders:

2 x Cat Elphinstone R1300
2 x Cat Elphinstone R1600
2 x Cat Elphinstone R1700

Late models, low hours. Need ASAP.

contact us

ref # S 11-20

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Mon, 18 Jul 2011 15:29:55 -0400

Can you offer anything per the following request (if low pressure air we can convert, just let us know what you can offer)?

We are looking the following  USED unit:

2 Drill rigs
INGERSOLL-RAND or BUCYRUS
Model : DM-45E or equivalent on BUCYRUS brand.
Engine: Cummins, QSK19
CFM: 1250
PSI: 350

Motor: CAT 3412
Ref. S/N: Beginning with …. 8000, etc…

· Lower hours
· Very good condition

contact us

ref # S 11-19

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Mon, 18 Jul 2011 06:07:11 -0800

Am looking for used seco 25 jack rotary hammers for under ground
mining. They should be compressed air or pneumatic operated.

contact us

ref # S 11-18

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Fri, 15 Jul 2011 10:25:13 -0400

Hi Denis

We looking for 

USED DETROIT DIESEL ENGINE 50 SERIE (4 cylinder / 275 HP)

contact us

ref # S 11-17

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Thu, 14 Jul 2011 12:41:58 -0500

I am searching for a 1991 Eimco EJC loader model 300 DTZ. Any condition is acceptable including scrap.

contact us

ref # S 11-16

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Tue, 12 Jul 2011 08:20:39 -0500
                  
Dear Mining Equipment,

We are looking for a used 13 to 16 ton mining haul chassis. Getman, EJC, JDT or Wagner. We will be removing the dump box and installing a Maxon Concrete Haul body.

contact us

ref # S 11-14

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Wed, 13 Jul 2011 22:13:33 -0700

The following is a list of equipment required for a mine project ASAP:

4-Cat 777D's  $650K - $800K range

2-Cat 992G HL 1 can be standard lift

Any Volvo articulating trucks

1-Cat D8T SS Ripper

4-Komatsu HM400-1 or 2

4-Cat 773E or F's up to 10K hours

1-Cat CS563D roller 84"

contact us

ref # S 11-15

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Tue, 5 Jul 2011 10:24:13 -0700

We have a customer looking to buy 5 each Clark 2109259 axle shaft used on Jarvis Clark underground mining equipment. Customer will take new or good used.

contact us

ref # S 11-13

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Tue, 5 Jul 2011 08:05:52 -0400

We're searching for a selection of used electric axial fans, from 21" to 54", 20hp to 150hp.

contact us

ref # S 11-12

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Tue, 28 Jun 2011 11:42:26 -0400

We are looking for long hole drill on tracks, model S36

contact us

ref # S 11-11

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Tue, 28 Jun 2011 13:21:47 -0400

I needed front axle differential for ST-3.5. Model
number ST-3/5 - DA04P0809, Manufacture Day - 2000. See the attached photos

contact us

ref # S 11-10B

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Thu, 23 Jun 2011 16:03:11 -0400

I looking for 1  used engine DETROIT serie 50

thanks

contact us

ref # S 11-10

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Mon, 20 Jun 2011 15:20:18 +0200

Looking for Terex TR 100 Rigid Dump Truck, Year 2007 an younger.

contact us

ref # S 11-09

Subscribe and receive the Buyer's contact information.

WANTED:

Looking for 1  LHD Atlas -Wagner 3.5 ,that need repair
No matter if is out of work
Thanks

contact us

ref # S 11-8

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Fri, 10 Jun 2011 18:54:16 +0000

We looking for scooptram ST710
Detroit diesel engine, S50

contact us

ref # S 11-07

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Tue, 7 Jun 2011 09:35:54 -0700

This is a list of used mining equipment we are considering for purchase for an underground mining project in the NWT, Canada.

Atlas Copco: 4 X St1520, 3 X Rocket Boomer 282, 2 X Boltec 235, 2 X Simba 1254, 1 X MT42, 2 X HT6020
Caterpillar: 1 X 120M, 1 X 966H, 2 X 988
Normet: 1 X Spraymec 1050 WP, 1 X Utimec 1500, 1 X MF 540

contact us

ref # S 11-06

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Fri, 3 Jun 2011 07:58:31 -0800

We are looking for a shotcrete machine and Atlas Copco MT2010 ejector trucks. Let me know if you know of anything out there. The trucks are much more of a priority.

contact us

ref # S 11-05

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Fri, 3 Jun 2011 07:47:14 -0400

looking for the following Mack trucks
>
> The basic specs are these:
>
> Model RD
> 2000-2001-2002
> 46,000 lbs rear axle (tandem)
> Spring suspension, preferrably the Mack Camelback system. This is std in
> most Mack dump trucks
> Ox or Heil dump bodies. The bodies MUST be steel, not aluminum.
> Double frame (std on Mack dump trucks)
> If the units have a third rear axle, good (triaxle). But this is NOT a
> condition.

contact us

ref # S 11-04

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Fri, 3 Jun 2011 07:49:47 -0400

As we spoke on the phone we need your Support on a quote for a used 2 TON bucket for a Scooptram ST1030.

This should be shipped to Nicaragua, South America; please let us know if you can locate this.

contact us

ref # s 11-03

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Tue, 31 May 2011 14:48:13 +0200

We are urgently looking for 01 off Tamrock HLX5 Drifter
Advise price and availability ASAP

2.
We are also looking for an HL600 Drifter
Advise price and availability - Could be used or rebuilt.

3.
Please advise price and availability of the Seco 36 (S36) Boart Drifter
Quotes for Refurbished drifters are welcome

contact us

ref # s 11-02

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Mon, 16 May 2011 12:10:24 -0230

Currently, we are
considering a purchase of a drilling rig for our laboratory equipment. This
will be used for experiment conduction. Basically, we will drill concrete
samples with depth of a maximum stroke of the rig (0.6 &Mac246; 2 m). Full face and
coring bits will be used in the diameter range of 4 to 8 inches.

General requirements:
- Robust and reliable system
- Fully hydraulic system preferred
- System should include power and control unit
- Minimum axial thrust (down force) of 8,000 lbs
- Minimum 100 rpm
- Torque: minimum 600 N*m
- Stroke in the range: 0.6 to 2 m
- Electric power unit preferred (other can be considered)

Any drilling rig that meets these requirements will be considered.

Required information:
- Specifications
- Price
- Delivery time
- Warranty

contact us

ref # s 11-01

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Mon, 28 Mar 2011 21:16

Hello.

I needed front axle differential for ST-3.5.
Model number ST-3/5 - DA04P0809, Manufacture Day - 2000.
See the attached photos this rear differential not LSD, and needed front
differential LSD, TSTAD (Torque Sensing Traction Adding Device).
If you dont differential, send me price for axle font and rear.

contact us

ref # W 11-12

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Mon, 28 Mar 2011 08:50:55 +1000


Good morning,

We are looking at leasing/buying the following equipment for an upcoming project. Can you please supply prices based on a two year contract:

PJB Mantransporter with forward facing seats  
Eimco 130 loader  
Eimco ED7 loader  
Eimco LS171 loader  
LHD Forks  
LHD Bucket  
Manbasket (double)  
35 tonne winch  - LHD compatable (for recoiling conveyor belt)  
5 tonne winch

contact us

ref # W 11-11

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Tue, 22 Mar 2011 08:55:27 +0100

Dear Denis,

we are looking for a GHH LF-6.3 used. And for the backhoe equipment of O&K RH 90.

contact us

ref # W 11-10

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Tue, 15 Mar 2011 09:17

I am looking to buy R1600, R1700, CAT LHDs
also interested in R2900 CAT LHD
and a AD30 underground truck

preferably in good running condition, interested in what ever is available

contact us

ref # W 11-09

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Mon, 14 Mar 2011 15:45:11 -0400

Anything available?

· 3 USED, Wheel Dozer
CAT, 824G
S/N beginning with  AWW… / 4SN….. 

- Lower hours
- Good condition
- Test report
- Serial Number
- Site location
All the previous listed information must be detailed to consider the evaluation of your quotation.

· 1 USED, Crawler Tractor
CAT, D7H
S/N beginning with  AECQ21….. 

contact us

ref # W 11-08

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Wed, 2 Mar 2011 11:41

We are looking to install a mining processing plant in Mexico. This Project consists in a 2,000 ton plant that
needs to crush and mill sedimentary rock.

- Jaw crusher 90 ton/hr
- Cone crusher 90 ton/hr
- 2 Bal mills 50 ton/hr
- Diesel Generator(s) that can provide energy to the above mentioned
equipment
- transport rubber bands
- 2 Off Road Trucks 48 ton
- Rope Shovel 5.2 yd3 or bigger
- Wheel loader 9 yd3
- Centrifugal concentrator 100 ton/hr(falcon or knelson)

We are also interested in finding a contractor to work with it in a 4766
hectare (11777 acre) for refractory ore silver and gold extraction.

contact us

ref # W 11-07

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Wed, 2 Mar 2011 06:51:02
DEAR SIR,
WE ARE LOOKING FOR  TWO CATERPILLAR 3516 , GENERATOR  2000 KW , MAX 700 HOURS USED, VOLTS 480, 60 HZ ANY COUNTY  IN THE WORLD.

IF YOU HAVE IT, PLEASE OFFER WITH FULL DETAILS.

contact us

ref # W 11-06

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Mon, 28 Feb 2011 13:45

REQUIRED
_*
- VOLVO EC460BLC

- VOLVO A35D/E, A40D/E

ALL ABOVE UP TO 4,000 HOURS, "CE" NOT REQUIRED

WILL APPRECIATE YOUR PROMPT ANSWER

contact us

ref # W 11-05

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Fri, 25 Feb 2011 17:10:32 -0000


Dear Sir

I am urgently looking for 

1)SP 6 CONVEYOR
Koepe wheel liners- part No. 3/1/875
                                         koepe liners-polyurethane
koepe wheel liners- part No. 3/1/870
koepe liners- aluminium
koepe wheel liners- part No. 3/1/880;joining pieces
-----------------------------------------------------------------------------2)DRIVE MOTOR  - ABBY-OY
electrical machines
LV motors, VASSA
 FINLAND,3 phase
 motor,M2CA 315LC 4B 5SR; IEC 80FF 600
SI SF =1.15,No.031-010 710483.M4-1011-968
INS.CL F IP551489 RPM,353A. Cos-0.85SFA 405
FOR: GA 250 MAIN DRIVE MOTOR
-----------------------------------------------------------------------------3)Ingersol rand winches (6)
Model FA2i-24MK1 FA2i(new and used)

-----------------------------------------------------------------------------4)Flygt Pumps.(used)
Details are:
Model BS2400,voltage 550v
Model BS2125,voltage 550v

contact us

ref # W 11-04

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Mon, 24 Feb 2011 22:46

Looking to purchase 3 Alimak Raise climbers with 250' of rail each, need in good working order

contact us

ref # W 11-03

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Mon, 21 Feb 2011 22:46

Looking to purchase a good used CAT 1600-1700 scoop. If you have one or now of an available one please let me know

contact us

ref # W 11-02

Subscribe and receive the Buyer's contact information.

WANTED:

Date: Thu, 17 Feb 2011 14:00:21

Looking for good used 2 to 2-1/2 yd LDH, 6 ft bucket, water cooled Deutz or Detroit Tier II engine

contact us

ref # W 11-01

Subscribe and receive the Buyer's contact information.

Equipment Wanted

We have Buyers for the following:

Become a Subscribers and receive sales leads as we receive them, also includes Buyer's contact information.

© 1996 to 2012 The Mining Equipment Prospector